Tổng quan các module nguồn Siemens

SITOP COMPACT



Overview
The slim power supply unit for control boxes
The single-phase SITOP compact are power supplies for the lower performance range. Thanks to the extremely space-saving slim design, they are especially suited to distributed applications in control boxes or in small control cabinets. The series is characterized by low power losses throughout the entire load range. The losses are extremely low even during idling, which means they are perfectly suited for applications that are frequently in stand-by mode. The SITOP PSU100C power supplies have a wide-range input for AC and DC networks; plug-in terminals facilitate the electrical connection.
To further increase the 24 V availability, the SITOP compact power supplies can be combined with DC UPS, redundancy and selectivity modules.
Main product highlights
24 V DC/ 0.6 A, 1.3 A, 2.5 A, and 4 A as well as 12 V DC/ 2 A and 6.5 A
24 V DC/3.7 A for the supply of NEC class 2 circuits with limited output power (100 VA)
1-phase wide-range input from 85 V to 264 V AC or 110 V to 300 V DC
Small mounting surface thanks to its slim design
High efficiency across the entire load range: up to 28 % energy savings in comparison with similar devices
Low energy consumption during no-load operation or stand-by: Energy savings of up to 53 % are possible
Adjustable output voltage for compensating voltage drops
Green LED for "Output voltage OK"
Plug-in connecting terminals for pre-fabricated wiring and fast electrical connection
Wide temperature range from –20 to +70 °C
Comprehensive certifications, such as UL, ATEX or

 
LOGO POWER
 

 
Overview
The flat power supply unit for distribution boards
Our miniature power supply units in the same design as the logic modules offer great performance in the smallest space: Efficiency has been improved across the entire load range, and the low power losses in no-load operation ensure efficient operation. The wide-range input for 1-phase networks as well as operation with direct voltage, the wide operating temperature range, comprehensive certifications as well as the switch-on behavior optimized for capacitive loads makes them suitable for universal use. These reliable power supplies with their flat, stepped profile can be used extremely flexibly in numerous applications such as in distribution boards, for example.
To further increase the 24 V availability, the LOGO!Power power supplies can be combined with DC UPS, redundancy and selectivity modules.
Main product highlights
5 V DC/ 3 A and 6.3 A, 12 V DC/ 1.9 A and 4.5 A, 15 V DC/ 1.9 A and 4 A as well as 24 V DC/ 1.3 A, 2.5 A and 4 A
1-phase, wide-range input for 85 V to 264 V AC or 110 V to 300 V DC
Flat LOGO! design with an installation depth of only 55 mm
High efficiency across the entire load range, low no-load losses
Power reserve on starting up through 1.5 times the rated current for capacitive loads
Wide temperature range from -20 to +70 °C
Comprehensive certifications, such as cULus, CB, FM, ATEX, cCSAus Class I Div. 2, GL and ABS
 
 

 
SITOP LITE


Overview
The low-cost basic power supply
The single-phase SITOP lite power supplies are designed for basic requirements in industrial environments and offer all the key functions at an attractive price. Thanks to the slim design, the power supplies require little space on the standard mounting rail, and their excellent efficiency ensures low thermal losses in the control cabinet.
To further increase 24 V availability, the SITOP lite power supplies can be combined with DC UPS, redundancy and selectivity modules.
Main product highlights
24 V DC/ 2.5 A, 5 A and 10 A
1-phase wide-range input with manual switchover
Slim design - no lateral installation clearances required
High degree of efficiency
Green LED for "24 V OK"
Adjustable output voltage for compensating voltage drops
Parallel connection possible
Ambient temperature range of 0 °C to 60 °C (above 45 °C with derating)
Short-circuit and overload protection
Certification to CE, cULus and CB

 
SITOP SMART



Overview
The powerful standard power supply
The one-phase and three-phase SITOP smart are the universal and powerful standard power supplies for machinery and plant engineering. Despite their compact design, they offer an excellent overload response: Thanks to a power boost of 150 %, loads with high power consumption can be connected without any problems and the permanent overload capability of 120% offers power reserves in case of expansions. The high degree of efficiency results in low energy consumption and minimal heat generation inside the control cabinet.
To further increase the 24 V availability, the SITOP smart power supplies can be combined with buffer, DC UPS, redundancy and selectivity modules.
Main product highlights
1-phase, 24 V DC/2.5 A, 5 A, 10 A and 20 A as well as 12 V/7 A and 14 A
3-phase, 24 V DC/5 A, 10 A, 20 A and 40 A
Compact design - no lateral clearances required
Extra power with 1.5 times the rated current (5 s/min) for brief functional overload
Permanent overload capability with 1.2 times the rated current up to 45 °C ambient temperature (24 V versions)
High degree of efficiency up to 91.5 %
Adjustable output voltage for compensating voltage drops
Signaling contact for easy integration in the plant monitoring system
Wide temperature range from -25 or –10 to +70 °C
Comprehensive certifications, such as cULus, cCSAus, ATEX, IECEx and GL

 
SITOP MODULE



Overview
The technology power supply for demanding solutions
The one, two and three-phase SITOP modular units are the technology power supplies for demanding solutions. They offer maximum functionality for use in complex plants and machines. The wide-range input allows a connection to almost any electrical power system worldwide and ensures a high degree of safety even if there are large voltage fluctuations. They offer outstanding overload characteristics: Power boost delivers up to three-times the rated current for short periods of time, and with extra power of 150%, loads with high power consumption can be connected without any problems. And in the event of an overload, you can choose between constant current or automatic restart. The extremely high efficiency keeps energy consumption and heat buildup in the control cabinet low, and the compact metal enclosure also saves space.
To further increase the 24 V availability, the SITOP smart power supplies can be combined with buffer, DC UPS, redundancy and selectivity modules.
Main product highlights
1-phase, 24 V DC / 5 A, 10 A, 20 A, 40 A
1-phase and 2-phase, 24 V DC / 5A, 10 A
3-phase, 24 V DC/ 20 A, 40 A, 36 V/ 13 A and 48 V/ 10 A, 20 A
Extremely slim design – no lateral installation clearances required
Power boost with 3 times rated current (for 25 ms) for tripping protective devices
Extra power with 1.5 times rated current (5 s/min) for brief functional overload
Selectable short-circuit response between constant current and restart
Symmetrical load distribution can be selected for parallel operation
Operating state on 3 LEDs
Extremely high efficiency up to 94 %
Large temperature range from -25 to +70 °C
Comprehensive certifications, such as cULus, ATEX, IECex and GL

 
PSU600 POWER SUPPLY MODULE



Overview
As a unique power supply system with complete integration in Totally Integrated Automation (TIA), SITOP PSU8600 sets new standards in industrial power supplies. The benefits of this integration are not only apparent during engineering in TIA Portal but also result in reliable operation. Voltage and current response thresholds can be set individually for each output of the power supply system, and selective monitoring of each output for overload results in fast fault location. Depending on requirements additional modules from the modular system, such as are used for buffering short power failures, can be added without wiring overhead.
Comprehensive diagnostic and maintenance information is available via PROFINET. It can be evaluated directly in SIMATIC S7 and visualized in SIMATIC WinCC. Optimal support is also provided for energy management of plant or machines: From the acquisition of energy data from individual outputs, the specific activation and deactivation of outputs via PROFIenergy, to direct integration in power management systems.

Benefits
Reduced space requirement and costs due to multiple integrated outputs with selective monitoring
Individually configurable outputs (no need for additional power supply for 5 V, 12 V or 15 V)
Compensation for power losses can be set separately for each output
Narrow width without lateral installation clearances
Low temperature rise in the control cabinet due to very high efficiency
If required, extra units from the modular system (more outputs, buffer module) can be added without wiring effort
Reliable operation due to bridging of short-term power failures
Two integrated Ethernet/PROFINET ports (no external switch required)
Complete integration in TIA requires less time and reduces costs during configuration (TIA Portal) and in operation
SIMATIC S7 function blocks for easy integration in STEP 7 user programs
Fast integration in operator control and monitoring with WinCC faceplates
Preventive maintenance reduces downtimes
Energy savings during breaks through targeted switching of outputs
Easy integration in energy management systems (PROFIenergy protocol)

Application
The SITOP PSU8600 power supply system is used as the central DC power supply of larger plants or machines with networked automation systems. The PSU8600 can be directly integrated into the LAN infrastructure by means of the two integrated PROFINET ports.



An extremely high level of reliability is achieved for the DC voltage supply by monitoring the individual DC branches for overload and bridging short-term power failures (brownouts). Complete transparency and fast fault localization are achieved by providing comprehensive diagnostic and maintenance information (e.g. load states of the outputs, phase/network failure, overtemperature) via PROFINET.
Energy-optimized operation is supported by measuring the current power and voltage values of the individual outputs as well as the individual activation and deactivation of the DC outputs via PROFIenergy during break times.

​Design
Basic devices
SITOP PSU8600, 3-phase power supply, 24 V DC/20 A/4x 5 A with four outputs (max. 5 A per output) and two Ethernet/PROFINET ports
SITOP PSU8600, 3-phase power supply, 24 V DC/20 A with one output and two Ethernet/PROFINET ports
SITOP PSU8600, 3-phase power supply, 24 V DC/40 A/4x 10 A with four outputs (max. 10 A per output) and two Ethernet/PROFINET ports
SITOP PSU8600, 3-phase power supply, 24 V DC/40 A with one output and two Ethernet/PROFINET ports
Modular system, consisting of:
SITOP CNX8600 4x 5 A (expansion module with 4 outputs at 5 A each)
SITOP CNX8600 4x 10 A (expansion module with 4 outputs at 10 A each)
SITOP BUF8600 100 ms/40 A (buffer module with 100 ms at 40 A)
SITOP BUF8600 300 ms/40 A (buffer module with 300 ms at 40 A)
SITOP BUF8600 4 s/40 A (buffer module with 4 s at 40 A)
SITOP BUF8600 10 s/40 A (buffer module with 10 s at 40 A)
You can connect up to four CNX8600 expansion modules as well as up to two BUF8600 buffer modules to the PSU8600 basic device. Connection takes place on top of the modules without any wiring by means of the System Clip Link, a connecting plug for system data and power supply. The order of the up to six possible add-on modules is random so that an existing configuration does not have to be altered if a module is added later.

Function
Supply of connected loads
An individual supply voltage can be set at each output of the power supply system. This means you can supply loads with different rated voltages simultaneously with only one device. Plus the voltage drop caused by the different cable lengths can be compensated individually, which means each load can be supplied with the optimum voltage.
Monitoring of the outputs for overload
Each output of the power supply system is individually monitored for overload. If the load current exceeds the set response threshold, the output is shut down according to specified time-current characteristics. All other outputs continue to be supplied reaction-free.
Enabling and disabling the outputs
Each output can be manually enabled or disabled directly on the device (e.g. for commissioning or service) and an overload tripping can be reset. Outputs disabled due to overload can also be reset remotely using a remote signal signal (24 V input).
In addition, program-controlled enabling and disabling of the outputs is possible using the integrated Ethernet/PROFINET interface. This also means you can disable individual outputs by means of PROFIenergy during breaks to save energy.
Communication
Comprehensive diagnostic information can be queried and processed via the integrated Ethernet/PROFINET interface during operation for both the device status as well as the status of the individual outputs. This results in complete transparency, minimal downtimes and quick fault location. The integrated web server also permits remote monitoring of the power supply system.
Buffering
In case of short-term power failure, the buffer module supplies the load current for supplying the outputs by means of its energy storage units Maintenance-free electrolytic capacitors or double-layer capacitors are used as energy-storage units.

Integration
Software for TIA-based automation systems
Different software components are available to facilitate easy integration of the SITOP PSU8600 in the TIA environment.
Engineering is simple via the TIA Portal. Special function blocks for SIMATIC S7-300, S7-400, S7-1200 and S7-1500 also support integration in the STEP 7 user program.
The comprehensive operating and diagnostic data of the power supply system can be visualized using ready-to-use PSU8600 faceplates for WinCC.
TIA Portal
User-friendly, failsafe integration of SITOP PSU8600 in the PROFINET network by means of drag-and-drop
Convenient configuration of the PSU8600 basic units and CNX8600 and BUF8600 add-on modules though simple selection from the TIA Portal hardware catalog
Free download of HSP (Hardware Support Package) for TIA Portal version V13 or higher available at
http://support.automation.siemens.com/WW/view/en/102254062
Free GSD file (Generic Station Description) for STEP 7 V 5.5
http://support.automation.siemens.com/WW/view/en/102254061



Error-free establishment of the PROFINET connection between the SITOP PSU8600 and the controller is easy with the TIA Portal
STEP 7 function blocks
Function blocks are available for STEP 7 user programs on SIMATIC S7-300/400/1200/1500. They allow further processing of the PSU8600 operating data.
Function blocks for STEP 7 V5.5
Function blocks for STEP 7 V13
Free download from:
http://support.automation.siemens.com/WW/view/en/102379345
Faceplates for WinCC
Ready-to-use faceplates save programming time during visualization of the SITOP PSU8600. The faceplates show all relevant statuses and values of the power supply system and the individual outputs and are available for the following systems:
Faceplates for WinCC V7.3
Faceplates for WinCC flexible 2008 SP3
Faceplates for WinCC Comfort/Advanced/ Professional V13
Free download from:
http://support.automation.siemens.com/WW/view/en/102379345



The pre-compiled WinCC faceplates show all the relevant data of the power supply system in an easy-to-understand display.
Web server
A web server is integrated in the PSU8600 basic unit for remote monitoring of the power supply system.
Remote monitoring of
Hardware configuration data
Operating data of the basic unit, all connected add-on modules and the individual outputs
Alarm messages
Remote access via
Firefox V29, Internet Explorer 8, 10, 11
IP address
User name and password



The password-protected web server offers a view of the configuration and operating data

 
SITOP IN THE SIMATIC DESIGN



Overview
The optimum supply for SIMATIC S7 and more
The original SIMATIC power supplies harmonize perfectly with the PLC network in terms of their design and functionality. In addition to the following SIMATIC systems, they also supply further loads reliably with 24 V.
SIMATIC S7-300
SIMATIC S7-1200
SIMATIC S7-1500
SIMATIC ET200M
SIMATIC ET200MP
SIMATIC ET 200pro

 
SITOP SPECIAL DESIGNS



Overview
Well prepared for special tasks and conditions
Whether restricted installation conditions, harsh ambient conditions, or special input or output voltages are concerned: These standard power supply units ensure a reliable and efficient supply of power, even when subject to extraordinary demands. Thanks to their compact design they can be integrated perfectly into existing installations
 
WALL MOUNTING


 
Overview
Low-cost power supply for wall mounting
The PSU100D switch mode power supplies extend the Siemens power supply portfolio to include single-phase devices for direct wall mounting using screws. The flat and rugged aluminum enclosure with IP20 degree of protection can be installed in various orientations and is therefore ideal for installation locations with limited space or for mounting in control cabinets and enclosures without a DIN rail. The low-cost devices meet all the basic requirements for a power supply, typical applications being apparatus, automated equipment and automation solutions.
Main product highlights
For 12-V standard applications from 3 A to 8.3 A
For 24 V standard applications from 2.1 A to 12.5 A
Compact metal enclosure
Wide-range input
Green LED for "24 V OK"
Certification in accordance with CE and UL
Adjustable output voltage from 22 to 28 V or from 11 to 14 V for compensating voltage drops
Temperature range from -10 °C to +70 °C
 
 
 
HIGH DEGREE OF PROTECTION
 


Overview
The 1- and 3-phase power supplies for wall mounting, with their rugged design and IP 67 degree of protection are ideal for distributed applications outside the control cabinet.
 
 
Battery Charging


Overview
Ideal for battery charging.
SITOP PSU3800 power supplies are ideal for battery charging, thanks to their constant-current characteristic. For other applications the output characteristic can also be switched to latching shutdown. The three-phase, wide-range input enables them to be used worldwide. The slim design requires little space on the DIN rail. Installation gaps are not required. The high degree of efficiency keeps the heat dissipation and energy consumption to a minimum. An LED and an isolated signaling contact indicate the status of the output voltage. 
 
 
Mechanic applications



Overview
SITOP PSU2600 for use in medical engineering
The 1-phase and 3-phase stabilized SITOP PSU2600 power supplies are specially designed for use in medical engineering.
Main product highlights
Rugged metal enclosure for industrial use
High degree of efficiency ensures low heat dissipation
Adjustable 24 to 28 V output voltage to compensate for voltage drops with long cables
"Single-fault safe" overvoltage protection on the secondary side (< 32 V) for supplying safety I/O components
Parallel operation of up to 2 PSUs
Power Boost with 3 times the rated current for selective tripping of downstream miniature circuit breakers
Status indicator via LED display (green – DC is OK) und signaling contact
Radio interference suppression Class B according to EN 60601
Supply harmonics limitation according to EN 61000-3-2
CE, UL/cUL approval, IEC 60601-1 (MOOP)
20 A version enables electronic RESET of 24 V via an isolated input
 
 
Alternative output voltage



Overview
Not just 24 V power supplies with alternative output voltages
SITOP provides a reliable supply of precisely stabilized DC voltage not just to 24 V loads, but also to loads with "alternative" supply voltage. 
 
ADD-ON MODULE



Expansion modules for increasing system availability
A power supply unit on its own cannot guarantee fault-free 24 V supply. Power failures, extreme variations in the mains voltage, or a faulty load can bring plant operation to a standstill and cause high costs. The add-on modules offer everything from extensive protection against interference on the primary and secondary side right up to complete all-round protection.
Redundancy modules – for doubling system availability



SITOP redundancy module
Advantages of the redundancy modules
High availability of the 24 V supply thanks to redundant configuration
Power is reliably supplied even when a power supply fails
Compact redundancy modules for power supplies up to 40 A
Redundancy module 24 V/NEC Class 2 with limiting to 100 VA
Diagnostic signal via LED and signaling contacts
Adjustable switching threshold for LED and signaling contacts
Selectivity modules – for protection of 24 V feeds



SITOP selectivity module
Advantages of selectivity modules
Reliable detection of overload or short-circuit in the 24 V circuit
Reliable shutdown in case of overload regardless of cable lengths or cross-sections
Four load feeders per module
Versions with adjustable threshold from 0.5 to 3 A or 3 to 10 A
Sequential connection of feeds is possible to reduce inrush current
Diagnostics via group signaling contact or single-channel signaling
Evaluation via free-of-charge SIMATIC S7 function blocks for modules with single-channel signaling
Buffer module – bridging power failures for as long as seconds



SITOP buffer module
Advantages of the buffer module
Power failures normally only last for fractions of a second, but they can still cause costly and time-consuming damage in sensitive production areas. In combination with SITOP smart and SITOP modular power supply units, the buffer module bridges short voltage dips of this type with its electrolytic capacitors and ensures uninterrupted operation. 

SITOP DC UPS



Overview
SITOP offers a comprehensive portfolio to protect against power failures with durations from a few seconds to several hours, ranging from buffer modules to system-integrated DC UPS units. Selection is based on the energy storage unit used, the associated ambient conditions, performance and functionality.
The selection matrix should help you to find the right 24 V buffering for your application:

for SITOP smart and SITOP modular power supply units

►Tài liệu tham khảo thêm về nguồn Sitop : http://sistech.com.vn/ho-tro-ky-thuat/thiet-bi-nguon-sitop